Speedy Bee Flex25 Analog 78mm F7 35A AIO 4S 2.5 Inch Cine Whoop FPV Racing Drone
Returns & exchanges accepted.
Color
Afterpay available:
Description:
The SpeedyBee Flex25 is a powerful racing drone that offers the perfect balance of agility and speed. With an F7 flight controller, 35A ESC, and 800mW VTX, this drone provides superior performance for aerial footage enthusiasts. The integrated RunCam Phoenix2 Nano Camera ensures crystal clear images for an immersive flying experience.
Specifications:
Brand Name: NoEnName_Null
Indoor/Outdoor Use: Indoor-Outdoor
Video Capture Resolution: Other
Camera Mount Type: Fixed Camera Mount
Controller Battery: No
Aerial Photography: Yes
Control Channels: 8 CHANNELS
Controller Mode: MODE1
Controller Mode: MODE2
Recommend Age: 12+y
Material: Carbon Fiber
Remote Distance: as show
Package Includes: Original Box
Remote Control: No
State of Assembly: Almost Ready
Features: FPV Capable
Model Number: Speedy Bee Flex25 Analog
Motor: Brushless Motor
|
SpeedyBee F745 35A AIO |
Gyro: MPU6000 OSD: AT7456E Support 3-6S Lipo Mounting Hole: 25.5x25.5mm Con. Current: 35A Firmware: BLHeli_S FC: Wireless firmware flashing + full Betaflight configuration ESC: Wireless firmware flashing + full BLHeli_S configuration Change motor directions wirelessly 4 UARTS + Barometer + I2C pads + 8MB Blackbox flash |
|
SpeedyBee 1404 4500KV Motor |
KV: 4500KV Mounting Hole: M2x9 , M2x5 |
|
Gemfan D63-3 2.5 Inch Propeller |
Diameter: 63mm Pitch: 3 in Inner shaft diameter: 1.5mm Hub Thickness: 4.9 mm Weight: 1.36g each |
|
SpeedyBee TX800 VTX |
Frequency: 5.8GHz 48CH Output Power: PIT/25/200/400/800mW Working Current: 250-750mA (5V) Voltage out: max 250mA ( 5V) Voltage In: 3.7-5.5V Video input impedance: 75 Ohm Antenna Connector: MMCX Weight: 5.6g (without antenna) PCB Size: 28x28mm Mounting Hole: 20x20mm |
|
VTX Antenna |
Model: Speedy Bee 5.8 GHz Antenna V2 Frequency range: 5.5-6.0 GHz Gain: 2.8dBi Polarization: RHCP |
|
RunCam Phoenix2 Nano FPV Camera |
Image Sensor: 1/2" CMOS Sensor Horizontal Resolution: 1000TVL Lens: 2.1mm (M8);FOV155 (4:3) Screen Format: 4:3 / 16:9 switchable Signal System: PAL / NTSC Switchable Power: DC 5-36V Dimensions: 14x14x22mm |
|
Recommend Battery( NOT Included) |
Recommend 4S 450-750mAh LiPo Flight Time: around 8mins (Test with 4S 850mAh Lipo ,total flight time depends on flying style / throttle position.) |
Package Included:
1x Speedy Bee Flex25 Analog FPV Drone
1x Extra Gem fan D63-3 Propeller Set ( 2L+2R)
1x set of connection cables
1x set of Screws and Nuts
World’ssmallest 2.5” cinewhoop
Get 2.5" props power at the size of a 2”cinewhoop
●28%+ smaller wheelbase vs other 2.5” cinewhoop
●Clearer video with RunCam Phoenix 2 Nano FPV Camera
●Built-in world's first F745 35A Bluetooth/WiFi AIO
●Naked GoPro/Insta360 Go/RunCam Thumb plug and play
●Tough unibody protective duct made of durable car bumper material
●Optional full-surrounded LED Strips
●Quick receiver binding via app
●Flight time up to 8 minutes
Get tighter shots with 28%+ smaller wheelbase!
Let’s go back to the drawing board - cinewhoop’s wheelbase is limited to its prop size. You can’t go smaller than 109mm wheelbase if 2.5” props is what you want. Our solution?
We placed the motors at different levels to greatly reduce the overall wheelbase, while still getting the power of a 2.5” props! At a 78mm wheelbase (similar to a tiny whoop!), you can carry your lightweight action cams with more confidence for that tight cinematic shots.
Clearer Analog Feed with RunCam Phoenix 2 Nano.
Get the best analog video feed with RunCam Phoenix 2 Nano into this quad. With a
1/2” image sensor and ƒ/2.0 huge aperture, indulge in excellent low light
performance and less digital shimmer. Here’s why the RunCam Phoenix is Joshua Bardwell’s favorite FPV camera.
Tougher unibody protective duct made of car bumper material
Say goodbye to broken ducts! Proven with extensive tests, this new unibody protective duct made of car bumper material will make sure your quad from impact in the most extreme shooting conditions. Reinforced with M2.5 hex standoffs and M2.5 screws, this quad will definitely be one of the toughest 2.5 inch cinewhoop in your fleet.
Powered by an F745 35A AIO wireless flight controller. F7!
While other brands are still using outdated F4 20A AIO flight controllers, we built our AIO FC with the high-end STM32F745 MCU and complement it with the powerful 35A Bluejay ESC.
Andforget the annoying USB cables and inaccessible USB ports. Just power the quad, connect the SpeedyBee app via Bluetooth and configure everything on your FC and ESC with just a smartphone. You could even flash the firmware for both FC and ESC, or tinker with your quad wirelessly anytime, anywhere.
Naked GoPro/RunCam Thumb/Insta360 Go plug and play.
Swap from Naked GoPro, Run Cam Thumb, and Insta360 Go quickly with 4 different cables* included in the package. The AUX 4 is configured for recording control -connect your action camera with the cable provided and start recording remotely using your radio. How’s that for convenience?
*Package includes:
1 x cable for NakedGoPro8
1 x cable for NakedGoPro6/7
2 x cable for RunCam Thumb series
Bind your receiver in a new convenient way
Getting a headache binding every time you get a new quad? Not anymore. Just follow the guide in the Speedy Bee app when you power your quad for the first time. Complete the steps and send it!
Fly for up to 8 minutes.
With our optimized setup, get up to 8 minutes of flight time with the analog version of this quad*. Fly longer and get that dream cinematic shot you always wanted.
*With 850mAh 4S LiPo. Total flight time depends on flying style/throttle position.
Unplug and swap your, camera, VTX, and receiver. No soldering required.
New to FPV, or just not a fan of soldering? Flex25 is made for you. Just unplug and swap your, camera, VTX, and receiver anytime. Replacing broken parts has never been easier.
