Happy model Mobula8 Digital HD 2S 85mm Whoop FPV Racing Drone with ELRS, BNF
Returns & exchanges accepted.
Color
Afterpay available:
Description:
Experience high-definition racing with the Happymodel Mobula8 Drone. Equipped with the powerful DJI O3 Air Unit and HDZero technology, this 85mm whoop drone offers a seamless and immersive FPV experience. With the added ELRS BNF and Walksnial Digital System, this drone is perfect for professional racers seeking top-of-the-line performance.
Specification:
The New Mobula8 Digital HD Micro FPV whoop comes with a new flight controller which is specific for Digital HD CINEWHOOP. Built-in UART ExpressLRS receiver and 12A 4IN1 Bleils ESC.
The same Brushless motor and Gem fan 2023 propeller as the Mobula8 Analog version. Comes With DJI O3, Walk snail avatar, and HDZERO VTX option. Smooth flight and High-definition video transmission would bring us exited FPV experience.
Features:
Digital HD FPV experience
New CrazyF405 ELRS HD flight controller
Powerful and Smooth
UART ExpressLRS receiver
Built-in black box for Gyroflow and PID Tune
Motor
Mode: EX1103 11000KV
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter:Φ1.5mm
Motor Dimension (Dia.*Len):Φ13.5mm*15.5mm
Weight(g):3.8g
No.of Cells (Lipo):1-2S
Propellers
Weight:0.88g
Material: PC
Pitch:2.3inch
Props Dia:52.17mm
Center Thickness:5mm
Center Hole Dia:1.5mm
Flight Controller
MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
GYRO Sensor: BMI270 (SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Serial ExpressLRS 2.4G
Built-in BMP280 Barometer
Built-in 8MBp black box
Built-in voltage meter sensor, voltage meter scale 110
Built-in current meter sensor, current meter scale 470
Onboard 4in1 ESC
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeli_S Bluejay firmware
Factory firmware: Bluejay ESC V0.19
Firmware target: Z-H-30
Default protocol: DSHOT300
When using 1s battery and high KV 0702/0802 motors, should set the startup power to 1100/1200
Onboard UART ExpressLRS 2.4GHz Receiver:
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Antenna: enameled copper wire 31mm length
Telemetry output Power: <12dBm
Default firmware version: ExpressLRS V3.0.1
Firmware target: HappyModel EP 2400 RX
Could update firmware via ExpressLRS configurator
DJI O3 Version
VTX & Camera: DJI O3 Air Unit
Works with DJI FPV Goggles V2, DJI Goggles 2, and DJI FPV Remote Controller 2
Walksnail Version
Camera: Avatar Lite camera
VTX: Avatar mini 1s module
HDZero Version
HDZero Nano Lite Camera & HDZero Whoop Lite VTX
Lite Version
NO VTX, NO Camera
Package includes:
Mobula8 Frame x1
CrazyF4HD ELRS flight controller firmware target:
BETAFLIGHTF4 x1
EX1103 KV11000 brushless motor x1
Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw) x1
Option1: DJI O3 Air unit x1
Option2: Walksnail avatar HD Mini 1S lite kit x1
Option3: HDZERO Whoop Lite bundle x1
Option4: No VTX and camera version x1
Canopy x1
Screwdriver x1
